RD-SP05 Low Dead Volume Splitter can be connected directly to any RD industrial detector
There is a 4.5 psi check valve inside the splitter. Eluant flows through the detector until the flow rate reaches about 0.5L/min.
At higher flow rates the check valve opens allowing excessive flow to bypass the detector.
For instance, at 10L/min process flow, 0.5L/min goes through the detector, while 9.5L/min goes through the splitter
REACH Devices, LLC.
6525 Gunpark Drive, Suite 370-179, Boulder, CO 80301
Call: (720) 288-5722
Ⓒ 2010-2017 REACH Devices, LLC. All rights reserved.